Find MID Certified Water Meter, Card Intelligent Water Meter, Plastic Water Meter on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.
Home > Products > MID Certified Water Meter > MID Certificated Volumetric Piston Type Plastic Water Meter
MID Certificated Volumetric Piston Type Plastic Water Meter
Basic Info

Model No.:  PD-AP

Product Description Model NO.: PD-AP Medium Temperature: Cold & Hot Water Meter Counter Instructions: Digital and Analogue Application: Civil Medium Pressure: General Water Meter Stucture: Traditional Type: Volumetric Rotary Piston Type Temperature: 0 Degrees Celsius to 50 Degrees Celsius Dial Reading: 0.02L to 99999 Cubic Meter Connecting Standard: Bsp & NPT Specification: Export Standard HS Code: 9028201000 Install: Horizontal/Vertical Level Measurement: R160/R200 Nominal Diameter: 15-50mm Principle: Volumetric Meter Work Environment: Wet Water Meter Material: Plastic Size: 15mm-50mm Working Pressure: 16 Bar Pressure Loss: 63 Trademark: Aimei Origin: China Volumetric Rotary Piston Water Meter
It is a volumetric rotary piston water meter for residential 
application in sizes 15mm-40mm for cold meter.

Features
Ensures high sensitivity and accurate registration throughout a wide flow range  
Mechanical transmission movement equates to maximum reliability.  
Corrosion resistant body
Liquid sealed register, easy reading and long time clear reading
Low starting flow rate.
Internal non return valve, internal strainer
Install in any position
Plastic meter body

Standards Compliance 
Directive 2004/22/EC on measuring instruments; 
the European  Standard EN14154+A1+A2: Water Meter; 
the International  Organization of Legal Metrology OIML R-49: 2006(E)

Optional Features 
Several lengths and connections available on request
Non return Valve
Reed switch option

Working Conditions
Water temperature: ≤50ºC for cold water meter  
Water pressure:   ≤1MPa or 1.6MPa optional
                 (10bar or 16bar option)

Accessories
Each meter has one set coupling optional: 2pcs coupling, 2pcs coupling nuts and 2pcs washers.

Installation requirements
The meter should be installed in horizontal position with the direction of the flow as 
indicated by the arrow cast in the meter body with the register face upwards.
Pipeline must be flushed before installation.
The meter should be constantly full of water during operation.

Maximum Permissible Error
In the lower zone from Qmin inclusive up to but excluding Qt is ±5%.
In the upper zone from Qt inclusive up to and including Qs is: cold water meter ±2%.
 
MID Certificated Volumetric Piston Type Plastic Water Meter
DN(mm) 15 20
Size(inch) 1/2" 3/4"
Q4(m³/h) 3.125 5
Q3(m³/h) 2.5 4
R160 Q2(l/h) 22.5 40
Q1(l/h) 15.62 25
R200 Q2(l/h) 20 32
Q1(l/h) 12.5 20
Max.Reading (m³) 9999
Min.Reading (Liter) 0.02
Max.Pressure (bar) 16
Pressure Loss (ΔP) 63
Max.Temperature T30 or T50
Pulse Output Option 
Vmax=24V,Imax=100mA,Pmax=2W


MID Certificated Volumetric Piston Type Plastic Water Meter
MID Certificated Volumetric Piston Type Plastic Water Meter

Contact us if you need more details on Meter Water. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Water Meter、Card Intelligent Water Meter. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : MID Certified Water Meter