Model NO.: DIN-368
Installation: Direct Connected
Electric Equipment: Three-phase Four-wire
Power Meter Connection: Terminal
Type: Energy Meter
Origin: Shenzhen China
Usage: Multi-Functional Energy Meter, Watt-Hour Meter, Meter for Industry and Home Use, Standard Electric Energy Meter, Prepayment Meter, Reactive Energy Meter, Multi-rate Watt-hour Meters, Maximum Demand Meter
Theory: Static Meter
Measured Signal: Pulse Peak
Certification: RoHS, ISO, CE
Install Type: DIN Rail
The meter completely accord with relevant technical requirements of class 1 single phase active energy meter stipulated in international standard IEC 62053-21. It can accurate and directly measure 50Hz or 60Hz active energy consumption from single phase AC electricity net
1. 35mm standard DIN rail installation, complying with standard DIN EN50022. Or front board setting (mounting holes center distance 63 mm), users can choose any one by themselves.
2. Six pole width (Modulus 12.5mm), complying with standard JB/T7121-1993.
3.Standard configuration 5+1 digits display (99999.1kWh) by step motor type impulse register. May select 6+1 digits display (Product Configuration code is AK).
4.Standard configuration one port of pulse output passive (polarity),May select increase a distant port of pulse output passive (nonpolarity), (Product Configuration code is AI).
5.And contact with all kind of AMR system conveniently,complying with standard IEC 62053- 31 and DIN 43864.
6.Two LED instructions power supply state (green) and signal of energy impulse (red).
7.Standard configuration dont detection direction of the flow of load current. May select automatic detection the direction of the flow of load current. And instructions (Only red energy impulse signal when working, that is meaning the direction of the flow of load current reverse).
8.Single direction measure single phase two wire active energy consumption. It is nothing with direction of the flow of load current. Complying with standard IEC 62053-21
1. The installation altitude less than 2000m
2. The surrounding temperature range: from -5~40 degree
3. In the non-explosive condition. or without adequate erosion and destruction of gas and dust conductive area
4. Without rain and snow invade
5. Pollution level 2.
Contact us if you need more details on DIN Meter. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Electronic Meter
、Electrical Meter. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : DIN Rail Meter